SUPAVENT TURBINE VENTILATOR
- Product Info
- Specifications
- Real Life Results
Product Info
A lightweight roof mounted, turbine ventilator. The Supavent is constructed from a UV stable engineering polymer with a highly efficient vertical vane design. It incorporates top and bottom precision stainless steel bearings. This unit is attractive and has an aerodynamic profile that complements most homes. The bearings are capable of resisting salt spray environment suitable for installation along coastal areas. The SupaVent is hail resistant and tested to 144 mph wind speed. It has been tested for rain penetration by CSIRO and passed with no water penetration. The product is long lasting and comes with a 15 year manufacturers warranty.
Key Features
- Starts in winds less than 3 mph
- Vertical vane design
- Sealed stainless steel bearings
- Malleable base fits most roof types
- Adjustable throat suits slopes up to 45 deg
- Presently available in 16 colors
- 15 year warranty available
Specifications
The SupaVent is constructed from a UV stable engineering polymer with a vertical vane design. It incorporates top and bottom precision stainless steel bearings. 15 year manufacturer’s warranty available.
| Flowrate | 159 CFM @ 6.8 mph, 180 CFM @ 10 mph wind speed 75 liters/second @ 11 km/hr, 85 liters/sec @ 16 km/hr wind speed |
| Rated Wind Speed | 134 mph, 216 km/hr |
| Throat Size | 10 inches, 250 mm |
| Material | Top: ASA Polymer Shaft: Aluminum Varipitch Throat: Aluminum Flashing (base): 19.7 in x 19.7 in x 0.028 in soft aluminum |
| Rotation Bearings | Twin 608ZZ ball bearings (410 stainless steel) |
| Weight | Top: 2.65 lbs, 1.2 kg Varipitch: 0.66 lbs, 0.3 kg Flashing: 0.88 lbs, 0.4 kg Total: 4.19 lbs, 1.9 kg |
CLICK HERE FOR FULL PRODUCT SPECIFICATION SHEET
Supavent Real Life Results - Residential Installation
Encenx has performed before & after temperature surveys on recent installations of Supavents to give you "Real Life" results and demonstrate the dramatic effects of installing Supavents.
The chart below is actual data collected before and after installing 4 Supavents on a home in Sugar Land, Texas. The residence is about 3,700 sqft.
The residence originally had Ridge Vents installed, but the owner complained of high temperatures in the attic, large electricity bills and hot conditions in the upper floor of the home. This is very typical of Texas homes, especially in summer.
Supavents were installed and a continuus temperature survey was conducted before and after to compare performace of ridge vents verses Supavents.
Key Results after Installing Supavents
- 30% drop in attic differential temperature (attic temp minus ambient temp) after ecoPower installed.
- 8.5% savings in cooling costs with ecoPower.
- Inaudible (nil) noise from Supavent with smooth operation in slight breezes.
- Noticeable decrease in upstairs living environment temperature.
SUPAVENT TURBINE VENTILATOR
Before & After Data Chart - Click on Chart for Larger Image
SUPAVENT TURBINE VENTILATOR
Before & After Data Chart - Click on Chart for Larger Image
